|
|
MC-4190 Corners
| Corner Style: |
|
Down load and print this template if you have any questions about the MC-4190 series corners fitting your existing molding. This PDF is designed to be printed at full scale and will allow you to compare your moldings profile to the corners profile. Select "Do not scale" when printing. The print will fit on a 8.5"x11" sheet.
This corner set can be used with a moulding that has a maximum height of 3.9" and a maximum width of 3.1". If you need to shorten the height you can reduce to the desired height by cutting from the top of the corner. You can also reduce the width, by cutting from the back of each side (only on the MC-4190i and MC-4190c pieces). Reducing the width is more difficult so if you know how wide you would like it you can call us at 1-800-419-1130 and we can cut them for you for a $2 per corner cutting charge. Please note that when you change the width, you change the design at the bottom of the corbel (end design just depends on how much is removed from the back of the corner). Our import polyurethane decorative building materials for interior and exterior decoration including moldings, medallions & domes, corbels, columns, door and window trim, etc. The products have been passed with CFC-Free certification. 1) Create a dramatic effect - classic, elegant and uniform. Can be used to for decorating your residence, office, hotel, club, etc. 2) Easy installation: surface has a sealed finish and pieces can be planed, sawed, sanded, nailed and glued the same as wood. 3) Anti-corrosion: resists acids and alkalis. 4) Light weight: lightweight, good resilience and hardness. 5) Waterproof: no moisture absorbing, water permeation, or mildew. 6) Primer coated and ready to paint!
|
|
|